Figure 3-27. Vibration damper- alinement marks.
This -alinement must be checked to insure correct valve
setting and damper effectiveness. If marks are out of
alignment more than 1 16 inch discard damper.
3-52. Installation
a. Install vibration damper as illustrated on figure 3-
ft-lbs.
b. With a dial gage mounted to front cover, check
vibration damper eccentricity and wobble at points A and
B as shown on figure 3-28.
Figure 3-28. Vibration damper eccentricity and wobble
check.
3-48
