c. Cleaning, Inspection and Repair.
(1) Clean all parts in an approved cleaning
solvent and dry thoroughly.
(2) Inspect all parts for excessive wear or
damage. Replace or repair defective parts.
d. Reassembly. Reassemble the vertical reversing
shaft in reverse of the numerical sequence shown on
e. Installation.
(1) Install the vertical reversing shaft
assembly.
a) Using a suitable hoist install the
shaft (11), bearing (9 and 10) and gear (8).
(b) Install lock plates (2), and plate (3),
shims (5 and 6) and screws (1).
(2) Install the swing shaft assembly (para 6-
1 Screw cap
2 Plate, lock
3 Plate, end
4 Shim
5 Shim
6 Fitting lube
7 Plug, pipe
8 Gear
9 Bearing
10 Bearing
11 Shaft
Figure 6-18. Crane vertical reversing shaft assembly,
removal, disassembly, reassembly and installation.
6-27
