Section X. CRANE VERTICAL SWING SHAFT ASSEMBLY
6-23. General
6-24. Crane Vertical Swing Shaft Assembly
The crane vertical swing shaft assembly is
a. Removal.
driven by vertical reversing shaft through a set of gears.
(1) Remove the vertical reversing shaft
A machined gear on the bottom end of the vertical swing
assembly (para 6-22).
shaft meshes with the turn table gear on the carrier and
(2) Remove the vertical swing shaft assembly
provides a means of rotating the crane revolving frame to
as instructed on figure 6-19.
the desired position.
Figure 6-19. Crane vertical sawing shaft assembly, removal and installation.
6-28
