TM 5-3810-295-34
6.
DRIVE OUT MASTER CHAIN LINK PINS. REMOVE CHAIN.
7.
REMOVE SHAFT NUT, LOCKWASHER, AND WASHER.
8.
SLIDE SPROCKET OFF.
9.
REMOVE BEARING RETAINER CAPSCREWS AND LOCKWASHERS (SAME AS
OPPOSITE END OF SHAFT).
10. REMOVE BEARING CAP NUTS AND LOCKWASHERS. REMOVE BEARING CAP.
11. ATTACH SUITABLE LIFTING DEVICE. REMOVE DRUMSHAFT ASSEMBLY.
Figure 2-5. Rear drumshaft assembly, removal and installation (sheet 2 of 2).
2-24
