TM 5-3810-295-34
b. Installation.
(1)
Refer to figure 2-5 and install rear drumshaft assembly.
(2)
Refer to figure 2-1 and install sheet metal removed during disassembly.
(3)
Refer to TM 5-3810-295-12 and perform the following operations:
(a) Install rear drum brake band. Install rear drumshaft drive chain case.
(b) Open hydraulic reservoir shut-off valve. Bleed hydraulic system to remove any air trapped in the
hydraulic lines.
CAUTION
Be sure hydraulic fluid does not come into contact with any brake or clutch band
2-13.
Front Drumshaft Assembly
a.
Removal
(1)
Refer to TM 5-3810-29S-12 and perform the following operations:
(a) Close hydraulic reservoir shut-off valve.
(b) Remove front drum brake band.
(2)
Refer to figure 2-1 and remove sheet metal, as required, to allow removal of front drumshaft from the cab.
(3)
Remove front drumshaft assembly in accordance with figure 2-6.
2-25
