TM 5-3810-295-34
STEP 4.
DISCONNECT HYDRAULIC HOSE AT SWIVEL. PLUG HOSE AND SHAFT HOLE.
STEP 5.
REMOVE SWIVEL BY UNSCREWING FROM SHAFT ASSEMBLY.
STEP 6.
REMOVE NUT, LOCKWASHER AND WASHER FROM SHAFT ASSEMBLY.
STEP 7.
REMOVE CLUTCH AS A UNIT.
STEP 8.
SUPPORT ASSEMBLY USING A SUITABLE LIFTING DEVICE. REMOVE NUTS AND LOCK WAHSERS.
USING PULLER REMOVE REVERSING SHAFT.
Figure 2-7. Reversing shaft assembly removal and installation (sheet 2 of 2).
2-28
