TM 5-3810-295-34
STEP 1. DISCONNECT HYDRAULIC LINE PLUG LINE.
STEP 2. REMOVE SWIVEL BY UNSCREWING FROM SHAFT ASSEMBLY.
STEP 3. MOVE BEARING RETAINER CAPSCREWS AND LOCKWASHERS ON SWIVEL END. REMOVE RIGHT
BEARING RETAINER.
STEP 4. REMOVE BEARING CAP NUTS AND LOCK WASHERS ON RIGHT SIDE. REOMVE BEARING CAP.
STEP 5. REMOVE BEARINGRETAINER CAPSCREWS AND LOCKWASHERS ON LEFT SIDE. REMOVE BEARING
RETAINER.
STEP 6. REMOVE BEARING CAP NUTS AND LOCK WASHERS ON LEFT END. REMOVE BEARING CAP.
STEP 7. REMOVE DRUM SHAFT ASSEMBLY.
Figure 2-6. Front drumshaft assembly, removal and installation
2-26
