TM 5-3810-295-34
Figure 15-1. Transmission assembly--exploded view (sheet 2 of 2).
.
e. Lock transmission gears with a soft
b. Remove screen bolts (6) and lock washers (7).
bar and remove cotter pin (25), flange nut (26),
Remove screen (8) and gasket (9).
flange washer (27), packing (28) and flange
c. Remove clutch cover screw and washer sets (10)
(29).
and remove clutch cover (11) and gasket (12). Remove
f The input, reverse, third and fourth
screw and lock washer sets (13), cover (14) and gasket
clutch assemblies are disassembled in a similar
(15).
manner as follows:
d. Remove screws (16) lock washers (17), flexible
Remove snap rings (30) and (31).
shaft housing (18) and gasket (19). Remove drive spring
(1) Refer to figure 15-2, which shows
(20), snap rings (21) and (22), drive bearing (23) and
the disassembly procedure for the input,
drive shaft (24).
reverse, third and fourth clutch assemblies.
15-3
