TM 5-3810-295-34
1 Snap ring
11 Snap ring
2 End plate
12 Washer
3 Disc hub
13 Inner ring
4 Baffle ring
14 Snap ring
5 Spring pin
15 Snap ring
6 Spring
16 Support bearing
7 Inner disc
17 Ball bearing
8 Outer disc
18 Outer race
9 Piston
19 Lock ball
10 Outer ring
20 Drum
Figure 15-2. Input, reverse, third and fourth clutch assembles--exploded view
(4) Remove clutch piston (9) and outer ring
(2) Depress end plate and remove snap ring (1)
(10).
Remove end plate (2).
Remove snap ring (11) and retainer washer (12).
(3) Remove clutch disc hub (3). Remove baffle ring
Remove clutch drum and bearing assembly.
(4). Remove spring pin (5) and spring (6 Remove inner
(5) Remove inner ring (13). Remove snap
disc (7) and outer discs (8).
rings (14) and (15). Press bearings (16) and (17)
from drum
15-4
