TM 5-3810-295-34
1 Screw
17 Snap ring
32 Spring
47 Stop
2 Lock washer
18 Plug
33 Pipe plug
48 Packing
3 Oil circuit plate
19 Selector valve
34 Pipe plug
49 Spring
4 Shift plug
20 Plug
35 Plug
50 Spool spring
5 Packing
21 Washer
36 Washer (special)
51 Stop
6 Valve
22 Snap ring
37 Roll pin stop
52 Packing
7 Valve housing
23 Adapter
38 Packing
53 Spool
8 Plug
24 Spacer
39 Valve stop
54 Stop
9 Washer (special)
25 Piston guide
40 Spring
55 Packing
10 Valve pin stop
26 Packing
41 Pin
56 Spring
11 Packing
27 Piston
42 Guide
57 Spacer
12 Valve
28 Valve
43 Packing
58 Ball
13 Valve
29 Cap washer
44 Piston
59 Seat
14 End plug
30 Spring cap
45 Spool
60 Plug
15 Spring
31 Packing
46 Roll pin
61 Pipe plug
16 Packing
62 Cover
Figure 15-5. Control valve assembly--exploded view.
(2) Remove oil circuit plate by removing screws (1)
special washers (9) and valve pin stops (10).
and lock washers (2). Lift off oil circuit plate (3).
(4) Remove packing (11) and valves (12) and (13).
(3) Remove shift plug (4), packing (5) and valve
Remove end plug (14), spring (15), and packing (16).
(6). Tap opposite end of cover lightly, and remove valve
housing (7). Remove plug (8) from the valve housing,
15-8
