TM 5-3810-305-23
0024
INSTALLATION - Continued
Transmission to Engine - Continued
8.
Check crankshaft end play and compare measurement with what was observed in Step 2. No end play can
mean crankshaft has been preloaded. Do not proceed until the reason for preload has been determined
and corrected.
9.
Remove guide stud. Install 12 capscrews (Figure 21, Item 3) through access hole (Figure 21, Item 4) through
flywheel into drive plate. Hand tighten all the way around. Tighten capscrews to 31 +/- 2 ft-lb (42 +/- 3 Nm).
1
2
3
4
M0201105
Figure 21. Transmission to Engine Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00029)