TM 5-3810-305-23
0024
INSTALLATION
Power Pack
WARNING
Weight of engine and transmission assembly is approximately 1,800 lb (816 kg). Use
adequate lifting equipment to lift and support engine/transmission assembly. DO NOT lift over
personnel or let personnel walk underneath suspended load. Failure to follow this warning
may cause injury or death to personnel.
NOTE
Use more than one person when installing engine and transmission assembly to make sure
engine and transmission DO NOT contact vehicle.
When reassembled engine and transmission is ready for installation, check rubber shock mounts for deterioration
and distortion. Replace if condition warrants. Examine all connecting components to make sure they are in position
to install.
1.
Attach hoist and chains to front engine lift eye and rear transmission mounts. Gradually lower engine and
transmission assembly down, guiding it into position on carrier.
2.
Install spacer (Figure 23, Item 1), washer (Figure 23, Item 2), and capscrew (Figure 23, Item 3) on front of
engine (Figure 23, Item 4).
1
4
3
2
M0206105
Figure 23.
Power Pack Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00029)