TM 5-3810-305-23
0027
REMOVAL
1.
Remove 14 capscrews (Figure 1, Item 1) from cylinder head (Figure 1, Item 2).
WARNING
Weight of the cylinder is approximately 80 lb (36 kg). Use adequate lifting equipment to lift
and support cylinder head. DO NOT lift over personnel or let personnel walk underneath
suspended load. Failure to follow this warning may result in injury or death to personnel.
2.
Using a suitable hoist and sling, remove cylinder head (Figure 1, Item 2) from block (Figure 1, Item 3) and
place on a suitable work table.
1
2
3
M02101045
Figure 1.
Cylinder Head Removal.
3.
Remove gasket (Figure 2, Item 1) from engine block (Figure 2, Item 2). Discard gasket and all gasket material.
03/15/2011Rel(1.8)root(maintwp)wpno(M00032)