TM 5-3810-305-23
FIELD MAINTENANCE
CYLINDER HEAD MAINTENANCE
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Lubricating Oil, Preservative and Break-In
Tool Kit, General Mechanic's (WP 0171, Table 1,
(WP 0170, Table 1, Item 45) Qty: 1
Item 17)
Rag, Wiping (WP 0170, Table 1, Item 52) Qty: 1
Face Shield, Industrial (WP 0171, Table 1, Item
25)
Gloves, Rubber (WP 0171, Table 1, Item 26)
Personnel Required
Goggles, Industrial (WP 0171, Table 1, Item 27)
(Two)
Suitable Lifting Device, 200-lb (91 kgs) Minimum
Capacity
Wrench, Torque, 1/2 Inch Drive Ratcheting, 250 ft-
References
lb (WP 0171, Table 1, Item 33)
Wrench, Torque, Click, Ratcheting 3/8 Inch Drive,
75 ft-lb (WP 0171, Table 1, Item 36)
Equipment Condition
Boom in horizontal position and fully retracted
Materials/Parts
(TM 5-3810-305-10)
Cleaning Compound, Solvent, Type III (WP 0170,
Battery cables disconnected (WP 0076)
Table 1, Item 9) Qty: 1
Exhaust manifold removed (WP 0042)
Gasket (WP 0172, Table 1, Item 145) Qty: 1
Fuel injection tubes removed (WP 0049)
Valve covers removed (WP 0035)
Rocker levers and push rods removed (WP 0031)
Manifold cover plate removed (WP 0041)
0027-1
03/15/2011Rel(1.8)root(maintwp)wpno(M00032)