TM 5-3810-305-23
0032
INSTALLATION - Continued
2.
Thoroughly clean and dry front seal area of crankshaft.
3.
Apply sealant to outside diameter of front seal (Figure 4, Item 4).
4.
Install seal (Figure 4, Item 4) in front cover (Figure 4, Item 2). Make sure seal and sealing surface is free of oil
residue to prevent leaks.
5.
Apply sealant to front cover (Figure 4, Item 2) and gear housing.
6.
Install new gasket (Figure 4, Item 3) on gear housing.
7.
Install front cover (Figure 4, Item 2) and 20 capscrews (Figure 4, Item 1). Tighten 20 capscrews to
18 ft-lb (24 Nm).
1
2
3
4
M0017105
Figure 4.
Front Cover Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00037)