TM 5-3810-305-23
0032
INSTALLATION - Continued
8.
Install access hole cover (Figure 5, Item 1), tachometer drive (Figure 5, Item 2), two washers
(Figure 5, Item 4), and capscrews (Figure 5, Item 3) in front cover (Figure 5, Item 5). Tighten two capscrews
to 7 ft-lb (9.5 Nm).
1
2
3
4
5
M0016105
Figure 5. Tachometer Drive Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install drive belt, pulleys, and fan (WP 0059).
2.
Install radiator and oil cooler assembly (WP 0054).
3.
Connect battery cables (WP 0076).
4.
Place boom in resting position (TM 5-3810-305-10).
5.
Start vehicle, run at operating temperature, and check for leaks (TM 5-3810-305-10).
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00037)