TM 5-3810-305-23
0043
CLEANING
1.
Clean parts IAW General Maintenance Instructions (WP 0162).
2.
Dry parts with compressed air.
END OF TASK
INSPECTION
1.
Inspect parts IAW General Maintenance Instructions (WP 0162).
2.
Inspect all parts for wear, pitting, cracks, or corrosion, and replace if necessary.
3.
Inspect oil passages to ensure they are clean and unobstructed. Inspect for corrosion, pitting, and damage.
Replace as necessary.
END OF TASK
INSTALLATION
1.
Apply antiseize compound to threads between injector nozzle hold-down nut and injector body.
NOTE
Protrusion on side of nozzle fits into a notch in head to orient injector.
2.
Install four new injector gaskets (Figure 3, Item 1).
1
M0290105
Figure 3. Lube Oil Injector Nozzles Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00049)
