TM 5-3810-305-23
FIELD MAINTENANCE
FUEL INJECTION PUMP MAINTENANCE
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Washer, Lock 9/16 Reg (WP 0172, Table 1, Item
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
54) Qty: 1
Indicator, Dial (WP 0171, Table 1, Item 6)
Washer, Seal (WP 0172, Table 1, Item 18)
Puller Set, Mechanical (WP 0171, Table 1, Item
Qty: 8
38)
Wrench, Torque, Click, Ratcheting 3/8 Inch Drive,
Personnel Required
75 ft-lb (WP 0171, Table 1, Item 36)
(Two)
Wrench, Torque, Dial, 1/4 Inch Drive (30 in-lb)
(WP 0171, Table 1, Item 37)
References
Materials/Parts
Gasket (WP 0172, Table 1, Item 68) Qty: 1
Locknut (WP 0172, Table 1, Item 63) Qty: 2
Equipment Condition
Locknut (WP 0172, Table 1, Item 65) Qty: 1
Boom in horizontal position and fully retracted (TM
O-Ring (WP 0172, Table 1, Item 64) Qty: 1
5-3810-305-10)
O-Ring (WP 0172, Table 1, Item 67) Qty: 1
Battery cables disconnected (WP 0076)
O-Ring (WP 0172, Table 1, Item 71) Qty: 2
Front cover removed (WP 0032)
O-Ring (WP 0172, Table 1, Item 72) Qty: 1
Fuel injection tubes removed (WP 0049)
Rag, Wiping (WP 0170, Table 1, Item 52) Qty: 1
Washer, Copper (WP 0172, Table 1, Item 66)
Qty: 1
0044-1
03/15/2011Rel(1.8)root(maintwp)wpno(M00050)