TM 5-3810-305-23
0044
REMOVAL - Continued
NOTE
Injection pump driveshaft must be locked before removing injection pump.
6.
Loosen injection pump driveshaft lockscrew (Figure 2, Item 2) on fuel injection pump (Figure 2, Item 1).
7.
Reposition locked timing seal (Figure 2, Item 3).
8.
Tighten injection pump lockscrew (Figure 2, Item 2) to 22 ft-lb (30 Nm).
3
1
2
M0270105
Figure 2.
Injection Pump Removal.
NOTE
Hold drive gear steady to prevent locked injection pump from rotating during drive
gear removal.
9.
Remove drive gear mounting nut (Figure 3, Item 2) and lockwasher (Figure 3, Item 3) from injection pump drive
gear (Figure 3, Item 1). Discard lockwasher.
2
1
3
M0271105
Figure 3.
Injection Pump Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00050)