TM 5-3810-305-23
0044
DISASSEMBLY - Continued
10.
Remove plug (Figure 14, Item 7) and washer (Figure 14, Item 1) from spring cap (Figure 14, Item 2) on injection
pump (Figure 14, Item 4).
WARNING
Remove cap slowly. Cap is under spring tension. Failure to follow this warning may cause
injury or death to personnel.
NOTE
Record the number of shims for use in assembly.
11.
Remove spring cap (Figure 14, Item 2) and o-ring (Figure 14, Item 3) slowly and remove spring
(Figure 14, Item 5) and shims (Figure 14, Item 6). Discard o-ring.
1
23
4
5
7
6
M1515105
Figure 14. Injection Pump Disassembly.
12.
Remove pressure end cap (Figure 15, Item 1) and o-ring (Figure 15, Item 2) from timing housing
(Figure 15, Item 3). Discard o-ring.
03/15/2011Rel(1.8)root(maintwp)wpno(M00050)
