TM 5-3810-305-23
0044
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
ASSEMBLY
1.
Install return fitting (Figure 18, Item 8) and washer (Figure 18, Item 7) on injection pump (Figure 18, Item 6).
2.
Install new locknut (Figure 18, Item 1), washer (Figure 18, Item 2), and idle screw (Figure 18, Item 3).
Align marks made during disassembly.
3.
Install washer (Figure 18, Item 5) and screw assembly (Figure 18, Item 4) on injection pump
(Figure 18, Item 6). Tighten screw assembly to 65 in-lb. (7.3 Nm).
1
3
2
4
8
7
5
6
M1518105
Figure 18.
Injection Pump Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00050)