TM 5-3810-305-23
0044
ASSEMBLY - Continued
8.
Install new o-ring (Figure 20, Item 2) and pressure end cap (Figure 20, Item 1) into timing housing
(Figure 20, Item 3). Tighten pressure end cap to 17.5 ft-lb (23.7 Nm).
1
2
3
M1516105
Figure 20.
Injection Pump Assembly.
9.
Install spring cap (Figure 21, Item 2), new o-ring (Figure 21, Item 3), spring (Figure 21, Item 5), and shims
(Figure 21, Item 6) onto timing housing (Figure 21, Item 4), using the number of shims recorded during
disassembly. Tighten spring cap to 17.5 ft-lb (23.7 Nm).
10.
Install plug (Figure 21, Item 7) into spring cap (Figure 21, Item 2).
1
23
4
5
7
6
M1515105
Figure 21.
Injection Pump Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00050)