TM 5-3810-305-23
0070
REMOVAL
NOTE
Tag all wire assemblies before disconnecting to aid in installation. Remove tags
following maintenance.
1.
Disconnect four knife connectors (Figure 1, Item 5) from under carrier at bottom of rotary manifold
(Figure 1, Item 4).
2.
Disconnect four knife connectors (Figure 1, Item 2) from inside upperstructure near top of collector ring
(Figure 1, Item 6).
3.
Remove two nuts (Figure 1, Item 1) and washers (Figure 1, Item 3) from cover (Figure 1, Item 7) of collector
ring (Figure 1, Item 6). Remove cover.
2
1
7
6
3
4
5
M0128105
Figure 1. Electrical Collector Ring Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00076)