TM 5-3810-305-23
FIELD MAINTENANCE
HORN MAINTENANCE
INITIAL SETUP:
References
Tools and Special Tools
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
Equipment Condition
Boom in horizontal position and fully retracted (TM
Materials/Parts
5-3810-305-10)
Nut, Self-Locking, He (WP 0172, Table 1, Item
Battery cables disconnected (WP 0076)
139) Qty: 1
Tag, Marker (WP 0170, Table 1, Item 68) Qty: 1
REMOVAL
NOTE
Tag all wire assemblies before disconnecting to aid in installation. Remove tags
following maintenance.
1.
Disconnect electrical wires (Figure 1, Item 5) from horn (Figure 1, Item 4).
2.
Remove locknut (Figure 1, Item 1), washer (Figure 1, Item 3), and horn (Figure 1, Item 4) from stud
(Figure 1, Item 2). Discard locknut.
1,2,3
4
M0124105
5
Figure 1.
Horn Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00075)
