TM 5-3810-305-23
0074
REMOVAL
NOTE
Tag and identify all wire assemblies before disconnecting to aid in installation. Remove tags
following maintenance.
1.
Disconnect cam switch electrical lead (Figure 1, Item 1).
1
M0152105
Figure 1. Axle Centering Light Switch Assembly Removal.
2.
Remove two capscrews (Figure 2, Item 6), locknuts (Figure 2, Item 7), and washers (Figure 2, Item 8) from
cam switch (Figure 2, Item 5). Discard locknuts.
3.
Remove switch (Figure 2, Item 5) from vehicle.
4.
Remove jam nut (Figure 2, Item 3) and washer (Figure 2, Item 1) from plate (Figure 2, Item 4).
5.
Remove two locknuts (Figure 2, Item 9), washers (Figure 2, Item 10), capscrews (Figure 2, Item 13), washers
(Figure 2, Item 12), block (Figure 2, Item 11), and rod (Figure 2, Item 14) from vehicle. Discard locknuts.
6.
Remove rod (Figure 2, Item 14) from block (Figure 2, Item 11).
7.
Loosen jam nut (Figure 2, Item 15) and remove rod (Figure 2, Item 14) from rod end (Figure 2, Item 16).
8.
Remove jam nut (Figure 2, Item 15) from rod (Figure 2, Item 14).
9.
Remove two capscrews (Figure 2, Item 2) and plate (Figure 2, Item 4) from vehicle.
03/15/2011Rel(1.8)root(maintwp)wpno(M00080)
