TM 5-3810-305-23
0074
ADJUSTMENT
1.
Rear wheels must be parallel to carrier frame when making any adjustments.
2.
Loosen jam nut (Figure 5, Item 2) on rod (Figure 5, Item 4).
3.
Thread rod (Figure 5, Item 4) in or out of rod end (Figure 5, Item 1) until cam switch is in the center of
groove on rod.
4.
Tighten jam nut (Figure 5, Item 2) against rod end (Figure 5, Item 1).
5.
Loosen two capscrews (Figure 5, Item 3). Slide cam switch until roller is centered in groove and just rests on
rod (Figure 5, Item 4). Tighten two capscrews.
6.
Red indicator light should be on while rear axle is being turned right or left. Light should be off when axle
is centered.
1 2
3
4
M0154105
Figure 5. Axle Centering Light Switch Assembly Adjustment.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Place boom in resting position (TM 5-3810-305-10).
2.
Check for proper operation.
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00080)