TM 5-3810-305-23
0075
REMOVAL - Continued
3.
Remove two screws (Figure 2, Item 1) and two flatwashers (Figure 2, Item 2) securing tachometer drive
(Figure 2, Item 8).
4.
Remove tachometer drive (Figure 2, Item 8), o-ring (Figure 2, Item 7), cover (Figure 2, Item 3) and gasket
(Figure 2, Item 4) from engine as an assembly. Discard gasket.
5.
If necessary, remove hub (Figure 2, Item 6) from shaft (Figure 2, Item 5).
6.
If necessary, remove tachometer drive (Figure 2, Item 8) and o-ring (Figure 2, Item 7) from cover
(Figure 2, Item 3). Discard o-ring.
4
3
2
1
5
6
7
8
M2107105
Figure 2.
Tachometer Drive Removal.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00081)