TM 5-3810-305-23
0075
INSTALLATION
1.
If removed, install hub (Figure 3, Item 6) onto shaft (Figure 3, Item 5).
2.
If removed, install drive (Figure 3, Item 8) and new o-ring (Figure 3, Item 7) to cover (Figure 3, Item 3).
3.
Position new gasket (Figure 3, Item 4) on cover (Figure 3, Item 3).
4.
Install new gasket (Figure 3, Item 4), cover (Figure 3, Item 3), new o-ring (Figure 3, Item 7) and tachometer
drive (Figure 3, Item 8) to engine as an assembly, and secure with two flatwashers (Figure 3, Item 2) and
screws (Figure 3, Item 1).
4
3
2
1
5
6
7
8
M2107105
Figure 3. Tachometer Drive Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00081)