TM 5-3810-305-23
FIELD MAINTENANCE
MSD-ICE WIRING HARNESS MAINTENANCE
INITIAL SETUP:
References
Tools and Special Tools
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
Equipment Condition
Boom in horizontal position and fully retracted (TM
Materials/Parts
5-3810-305-10)
Rag, Wiping (WP 0170, Table 1, Item 52) Qty: 1
Battery cables disconnected (WP 0076)
Tag, Marker (WP 0170, Table 1, Item 68) Qty: 1
REMOVAL
NOTE
Tag all wire assemblies before disconnecting to aid in installation. Remove tags
following maintenance.
1.
Disconnect main MSD-ICE harness (Figure 1, Item 10) from resistor module (Figure 1, Item 8), tachometer
sender (Figure 1, Item 12), fuel pressure transducer (Figure 1, Item 2), alternator (Figure 1, Item 3), starting
motor solenoid (Figure 1, Item 5), fuel differential pressure switch (Figure 1, Item 1), shunt (Figure 1, Item 6)
batteries (Figure 1, Item 7), starting motor (Figure 1, Item 4), and fuel solenoid (Figure 1, Item 11).
2.
Remove main MSD-ICE harness mounting clamps (Figure 1, Item 9) and hardware from main MSD-ICE
harness (Figure 1, Item 10).
3.
Remove MSD-ICE harness (Figure 1, Item 10) from vehicle.
2
1
3
4
12
5
6
7
11
10
M0163105
9
8
Figure 1. Main MSD-ICE Harness Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00087)
