TM 5-3810-305-23
0079
INSTALLATION
1.
Position cab main harness in cab.
2.
Install new tiedown straps (Figure 1, Item 16), nuts (Figure 1, Item 9), capscrews (Figure 1, Item 8), and cab
main harness mounting clamps (Figure 1, Item 13) to secure cab main harness.
3.
Connect cab main harness to cab floor ground (Figure 1, Item 12), circuit breaker (Figure 1, Item 11),
sloping dash panel (Figure 1, Item 10), horn (Figure 1, Item 7), defroster fan (Figure 1, Item 5), brakelight
switch (Figure 1, Item 6), wiper motor (Figure 1, Item 2), turn signal switch (Figure 1, Item 17), speedometer
(Figure 1, Item 3), headlights (Figure 1, Item 1), and speedometer alarm (Figure 1, Item 4).
4.
Install wire (Figure 1, Item 15) and two clamps (Figure 1, Item 14) to heater and circuit breaker.
5
3
2
1
4
6
7
8
17
16
9
10
13
11
12
15
14
M0127105
Figure 1. Cab Main Harness Maintenance.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00085)