TM 5-3810-305-23
0082
INSTALLATION - Continued
NOTE
Boom must be raised to highest position to aid in installing wire harness clamps.
6.
Connect battery cables (WP 0076).
7.
Start engine. Raise boom to highest position.
8.
Install clamp (Figure 13, Item 6), washer (Figure 13, Item 5), and nut (Figure 13, Item 4) on vehicle.
9.
Install clamp (Figure 13, Item 8), washer (Figure 13, Item 7), and nut (Figure 13, Item 9) on vehicle.
10.
Remove two nuts (Figure 12, Item 1) and washers (Figure 12, Item 2).
11.
Install two clamps (Figure 12, Item 3), washers (Figure 12, Item 2), and nuts (Figure 12, Item 1) on vehicle.
1,2,3
4,5,6
7,8,9
1,2,3
M0170105
Figure 13. Boom Wiring Harness Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00088)