TM 5-3810-305-23
0082
INSTALLATION - Continued
16.
Install cable (Figure 15, Item 4) into strain relief tube (Figure 15, Item 3).
17.
Install connector (Figure 15, Item 2) and four screws (Figure 15, Item 1) on boom.
1
2
4
3
M0168105
Figure 15. Boom Wiring Harness Installation.
CAUTION
Anti-two block switch is serviced only as a complete assembly. DO NOT discard or lose any
parts. Failure to follow this caution may result in damage to equipment.
NOTE
Install wire harness as tagged during removal.
18.
Connect wiring harness (Figure 16, Item 3) on switch (Figure16, Item 4).
19.
Install cover (Figure 16, Item 2) and four screws (Figure 16, Item 1) on switch (Figure 16, Item 4).
1
4
3
2
M0167105
Figure 16. Boom Wiring Harness Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00088)