TM 5-3810-305-23
0087
ASSEMBLY
1.
Position one strap (Figure 2, Item 19) on each side of lever (Figure 2, Item 13) and install pin
(Figure 2, Item 11) and new cotter pin (Figure 2, Item 14).
2.
Install two spacers (Figure 2, Item 12) on each side of lever (Figure 2, Item 13) and install pin
(Figure 2, Item 17) in bracket (Figure 2, Item 3).
3.
Install two snaprings (Figure 2, Item 16) on each end of pin (Figure 2, Item 17).
END OF TASK
INSTALLATION
1.
Position bracket (Figure 2, Item 3) over mounting holes in frame and install four new lockwashers
(Figure 2, Item 1) and capscrews (Figure 2, Item 2).
2.
Install pin (Figure 2, Item 20) through two straps (Figure 2, Item 19) and install new cotter pin
(Figure 2, Item 18).
3.
Position clamp (Figure 2, Item 8) over cable on bracket (Figure 2, Item 3) and install two screws
(Figure 2, Item 9) and new locknuts (Figure 2, Item 5).
4.
Position clevis (Figure 2, Item 10) on lever (Figure 2, Item 13) and install pin (Figure 2, Item 4) and new
cotter pin (Figure 2, Item 15).
5.
Check control for freedom of movement.
6.
Connect battery cables (WP 0076).
1
2
3
4
5
20
19
18
6
16
15
11
7
10
14
12
17
8
13
12
M2140105
16
9
Figure 2. Transmission Controls Maintenance.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00094)