TM 5-3810-305-23
0087
REMOVAL
1.
Disconnect battery cables (WP 0076).
2.
Remove cotter pin (Figure 1, Item 15) and pin (Figure 1, Item 4) from clevis assembly (Figure 1, Item 10)
through the cut-out in bracket (Figure 1, Item 3). Discard cotter pin.
3.
Remove two screws (Figure 1, Item 9), locknuts (Figure 1, Item 5), and clamp (Figure 1, Item 8) from bracket
(Figure 1, Item 3). Discard locknuts.
4.
Remove cotter pin (Figure 1, Item 18), pin (Figure 1, Item 20), and two straps (Figure 1, Item 19) from
transmission. Discard cotter pin.
5.
Remove four capscrews (Figure 1, Item 2), lockwashers (Figure 1, Item 1), and bracket (Figure 1, Item 3).
Discard lockwashers.
END OF TASK
DISASSEMBLY
1.
Remove two snaprings (Figure 1, Item 16), pin (Figure 1, Item 17), two spacers (Figure 1, Item 12), and
lever (Figure 1, Item 13).
2.
Remove cotter pin (Figure 1, Item 14), pin (Figure 1, Item 11), and two straps (Figure 1, Item 19).
Discard cotter pin.
1
2
3
4
5
20
19
18
6
16
15
11
7
10
14
12
17
8
13
12
M2140105
16
9
Figure 1. Transmission Controls Maintenance.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00094)