TM 5-3810-305-23
0095
REMOVAL - Continued
CAUTION
DO NOT interchange bearings, pinions, or input yoke from other axles. Preload is factory set.
Failure to follow this caution may result in damage to equipment.
7.
Remove pinion nut (Figure 2, Item 1), input yoke (Figure 2, Item 2), and dust shield (Figure 2, Item 8).
Discard pinion nut.
8.
Remove trunnion (Figure 2, Item 4) and spacer (Figure 2, Item 3), if necessary.
9.
Remove input yoke seal (Figure 2, Item 5).
1
2
3
8
4
7
5
6
M0315105
Figure 2. Front Differential Removal.
END OF TASK
CLEANING
1.
Clean parts IAW General Maintenance Instructions (WP 0162).
2.
Remove sealant IAW General Maintenance Instructions (WP 0162).
3.
Clean all parts and surfaces with solvent cleaning compound IAW General Maintenance Instructions
4.
Dry parts with compressed air.
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00105)