TM 5-3810-305-23
0096
REMOVAL - Continued
NOTE
Jacking bolts may be required to remove brake drum. There is no difference in the
maintenance procedures for front and rear planetary wheel ends.
1.
Remove three assembly screws (Figure 1, Item 3) and brake drum (Figure 1, Item 2) from wheel
hub (Figure 1, Item 1).
2.
Position a suitable container to accept oil from wheel end.
3.
Rotate wheel hub (Figure 1, Item 1) so that drain plug (Figure 1, Item 4) is at 6 o'clock position.
Remove drain plug.
1
2
3
4
M0308105
Figure 1. Planetary Wheel End Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00106)
