TM 5-3810-305-23
0104
REMOVAL - Continued
8.
Remove cotter pin (Figure 3, Item 21) from pin on yoke (Figure 3, Item 18). Discard cotter pin.
9.
Remove pin (Figure 3, Item 17) from yoke (Figure 3, Item 18) connecting brake booster valve to brake
pedal (Figure 3, Item 8).
NOTE
Brake pedal stop bracket will be removed along with brake booster mounting brackets.
10.
Remove four capscrews (Figure 3, Item 6) and lockwashers (Figure 3, Item 7) holding brake booster valve and
pedal stop bracket to mounting bracket (Figure 3, Item 27). Discard lockwashers.
11.
Lower and remove brake booster valve from under dash.
NOTE
Before removing yoke, measure and retain distance between locking nuts to aid in assembly.
12.
Remove yoke (Figure 3, Item 18) and push rod (Figure 3, Item 5) by loosening jam nuts (Figure 3, Item 28)
and unscrewing from brake booster valve, if required.
13.
Remove two elbows (Figure 3, Item 26) and o-rings (Figure 3, Item 25) from master cylinder. Discard o-rings.
13
3
9
2
14
8
4
1
12
15
11
5
10
16
6
7
17
34
32
19
18
31
28
20
33
27
30
23 22
21
29
24
26
25
M0490105
Figure 3.
Brake Booster Valve/Master Cylinder Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00115)
