TM 5-3810-305-23
0108
ADJUSTMENT
1.
Position wheels straight ahead.
2.
Loosen clamp assemblies.
3.
Measure distance between outside edges of tread shoulders at axle height on front side of tires.
Repeat measurement on back side of tires. When adjustment is correct, back side measurement will be
0.125 to 0.250 inch (3.18 to 6.35 mm) greater than front side measurement.
4.
Turn tie rod (Figure 3, Item 8) until measurements fall within tolerance found in Step 3.
5.
Tighten clamp assembly to 33 ft-lb (45 Nm).
6.
Perform Steps 1 through 5 for other axle, if necessary.
7.
Check for proper operation.
1
2
8
3
6
7
M0186105
54
Figure 3.
Tie Rod Assembly Adjustment.
END OF TASK
FOLLOW-ON MAINTENANCE
Place boom in resting position (TM 5-3810-305-10).
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00120)
