TM 5-3810-305-23
0123
INSTALLATION
WARNING
Weight of beam is approximately 129 lb (59 kg). Use adequate lifting equipment to lift and
support beam. DO NOT lift over personnel or let personnel walk underneath suspended load.
Failure to follow this warning may cause injury or death to personnel.
1.
Install beam (Figure 4, Item 1) in frame, aligning holes in beam with holes in frame. Support with lifting device.
2.
Install pin (Figure 4, Item 8) into beam (Figure 4, Item 1).
3.
Install rod end (Figure 4, Item 9), new lockwasher (Figure 4, Item 6), and capscrew (Figure 4, Item 7).
4.
Install pin (Figure 4, Item 2) into beam (Figure 4, Item 1) and cylinder rod eye. Install new pin flush with rod
end on cylinder.
5.
Remove lifting device supporting beam (Figure 4, Item 1) and cylinder.
4
3
2
6
7
9
5
1
14
8
3
13
6
5
10
2
7
5
98
12
10
10
11
12
1
13
11
14
M0585105
Figure 4. Outrigger Assembly Installation.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00138)
