TM 5-3810-305-23
FIELD MAINTENANCE
OUTRIGGER HYDRAULICS MAINTENANCE
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Sealing Compound, Loctite 222 (WP 0170, Table
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
1, Item 55) Qty: 1
Pan, Drain (WP 0171, Table 1, Item 39)
Strap, Tiedown Electrical (WP 0172, Table 1, Item
164) Qty: 2
Materials/Parts
Cap Set, Protective, Dust and Moisture Seal
References
(WP 0170, Table 1, Item 7) Qty: 1
Lubricating Oil, Hydraulic MIL-L-2104 OE, 10
Grade 1 (WP 0170, Table 1, Item 42) Qty: 1
Nut, Self-Locking He (WP 0172, Table 1, Item
Equipment Condition
139) Qty: 18
Boom in horizontal position and fully retracted (TM
O-Ring (WP 0172, Table 1, Item 42) Qty: 18
5-3810-305-10)
O-Ring (WP 0172, Table 1, Item 44) Qty: 6
Battery cables disconnected (WP 0076)
Rag, Wiping (WP 0170, Table 1, Item 52) Qty: 1
REMOVAL
WARNING
DO NOT disconnect or remove any hydraulic system lines or fitting unless engine is shut
down and hydraulic system pressure has been relieved. Tighten all connections before
applying pressure. Escaping hydraulic fluid under pressure can penetrate the skin.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing
any hydraulic fitting.
Wear protective eye covering.
Avoid sudden movement of vehicle.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
Failure to follow these warnings may result in injury or death to personnel.
0143-1
03/15/2011Rel(1.8)root(maintwp)wpno(M00160)
