TM 5-3810-305-23
0143
INSTALLATION
1.
Install elbow (Figure 2, Item 11) on tee (Figure 2, Item 12).
2.
Install elbow (Figure 2, Item 10) on tee (Figure 2, Item 29).
3.
Install adapter (Figure 2, Item 2) an elbow (Figure 2, Item 33) on tee (Figure 2, Item 32).
4.
Install hose (Figure 2, Item 31) on adapter (Figure 2, Item 2).
5.
Connect hoses (Figure 2, Item 31) to elbow (Figure 2, Item 1).
6.
Install hose (Figure 2, Item 4) on elbow (Figure 2, Item 1).
7.
Install hose (Figure 2, Item 4) to tee (Figure 2, Item 29).
8.
Install left rear outrigger hold valve (WP 0151).
9.
Install hoses (Figure 2, Items 36 and 37) and tee (Figure 2, Item 32) to outrigger hold valve.
10.
Install right rear outrigger hold valve (WP 0151).
11.
Install hoses (Figure 2, Items 35 and 38) to outrigger hold valve, solenoid, and elbow.
12.
Install hose (Figure 2, Item 13) to tee (Figure 2, Item 12).
13.
Install adapter (Figure 2, Item 15) to hose (Figure 2, Item 13) and install adapter to tee (Figure 2, Item 16).
14.
Install elbow (Figure 2, Item 24) to tee (Figure 2, Item 16)
15.
Install hose (Figure 2, Item 23) to elbow (Figure 2, Item 10).
16.
Install new tiedown straps (Figure 2, Item 9) and seven clamps (Figure 2, Items 3, 8, 14, 25, 26, 27, and 28).
17.
Connect hose (Figure 2, Item 23) to elbow (Figure 2, Item 22).
18.
Install left front outrigger hold valve (WP 0151).
19.
Install hoses (Figure 2, Items 19 and 20), elbow (Figure 2, Item 24), and tee (Figure 2, Item 16) to outrigger
hold valve.
20.
Install new locknuts (Figure 2, Items 6), washers (Figure 2, Items 7 and 30), and clamps
(Figure 2, Items 5, 8, 17 and 34).
21.
Install right front outrigger hold valve (WP 0151).
22.
Install hoses (Figure 2, Items 18 and 21) to outrigger hold valve, solenoid and elbow (Figure 2, Item 24).
23.
Close dipstick cap.
0143-4
03/15/2011Rel(1.8)root(maintwp)wpno(M00160)
