TM 5-3810-305-23
0143
REMOVAL - Continued
1.
Turn dipstick cap 1/4 turn to safety notch to relieve pressure.
NOTE
Tag all hose and tube assemblies before disconnecting to aid in installation. Cap and plug
all ports. Remove caps, plugs, and tags following maintenance.
2.
Remove right front outrigger hold valve (WP 0151).
3.
Remove hoses (Figure 1, Items 18 and 21) from outrigger hold valve, solenoid, and elbow (Figure 1, Item 24).
4.
5.
Remove locknuts (Figure 1, Item 6), washers (Figure 1, Items 7 and 30), and clamps
(Figure 1, Items 5, 8, 17, and 34). Discard locknuts.
6.
Remove hoses (Figure 1, Items 19 and 20), elbow (Figure 1, Item 24), and tee (Figure 1, Item 16) from outrigger
hold valve.
7.
Disconnect hose (Figure 1, Item 23) from elbow (Figure 1, Item 22).
8.
Remove two tiedown straps (Figure 1, Item 9) and seven clamps (Figure 1, Items 3, 8, 14, 25, 26, 27, and 28).
Discard tiedown straps.
9.
Remove hose (Figure 1, Item 23) from elbow (Figure 1, Item 10).
10.
Remove elbow (Figure 1, Item 24) from tee (Figure 1, Item 16).
11.
Remove adapter (Figure 1, Item 15) from tee (Figure 1, Item 16) and remove adapter from hose
(Figure 1, Item 13).
12.
Remove hose (Figure 1, Item 13) from tee (Figure 1, Item 12).
13.
14.
Remove hoses (Figure 1, Items 35 and 38) from outrigger hold valve, solenoid, and elbow (Figure 1, Item 33).
15.
16.
Remove hoses (Figure 1, Items 36 and 37), elbow (Figure 1, Item 33), and tee (Figure 1, Item 32) from outrigger
hold valve.
17.
Disconnect hose (Figure 1, Item 4) from elbow (Figure 1, Item 1).
18.
Remove hose (Figure 1, Item 4) from tee (Figure 1, Item 29).
19.
Disconnect hose (Figure 1, Item 31) from elbow (Figure 1, Item 11).
20.
Remove hose (Figure 1, Item 31) from adapter (Figure 1, Item 3).
21.
Remove adapter (Figure 1, Item 2) and elbow (Figure 1, Item 33) from tee (Figure 1, Item 32).
22.
Remove elbow (Figure 1, Item 10) from tee (Figure 1, Item 29).
23.
Remove elbow (Figure 1, Item 11) from tee (Figure 1, Item 12).
0143-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00160)