TM 5-3810-306-10
c.
Place a miracle pointer, carpenter level or similar
device on a machined surface such as the
turntable bearing or bearing mounting surfaces.
d.
Using outriggers, level crane as indicated on the
device used in step c.
e.
Using mounting screws, adjust bubble level
indicator to show level.
STOWING OUTRIGGERS
1.
Set R (rear) STABILIZER toggle switches and
position toggle switch to RETRACT until rear
stabilizers retract several inches.
2.
Set F (front) STABILIZER toggle switches and
position toggle switch to RETRACT until front
stabilizers retract several inches.
3.
Repeat steps 1 and 2 until crane is resting on all 4
wheels and stabilizer floats are several inches off
ground.
WARNING
Keep feet and hands clear of the floats
when unlocking them from the stabilizer.
Failure to follow this procedure could
result in personnel injury.
4.
Release locking levers and allow floats to drop to
ground.
5.
Continue to retract stabilizers until they are fully
retracted.
6.
Set appropriate EXTENSION toggle switch and
position toggle switch to RETRACT each outrigger.
NOTE
More than one outrigger can be
retracted at a time.
7.
Stow outrigger floats on pins provided. Secure with
lock pins.
2-47
