TM 5-3810-306-20
Section IV. ENGINE STARTING AID MAINTENANCE
QUICK START STARTING FLUID CYLINDER SERVICE 47
TOOLS:
General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
Clean rags (Item 1, Appendix C)
Starting fluid cylinder (Item 44, Appendix C)
EQUIPMENT CONDITION:
Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
CAUTION
Do not allow dirt to fall in valve (3).
Dirt in valve (3) could prevent starting
fluid
cylinder
(1)
from
sealing
properly.
1.
REMOVE QUICK START STARTING FLUID
CYLINDER (1).
a. Unscrew clamp (2).
b. Unscrew starting fluid cylinder bottle (1) from
valve (3). Pull starting fluid cylinder bottle (1)
from clamp (2). Cover valve with rag.
c. Properly dispose of starting fluid cylinder.
2.
INSPECT PARTS FOR DAMAGE. REPLACE AS
REQUIRED.
INSTALLATION:
1.
INSTALL
QUICK
START
STARTING
FLUID
CYLINDER (1).
a. Remove rag.
b. Put starting fluid cylinder bottle (1) through clamp
(2).
c. Screw starting fluid cylinder bottle (1) in valve (3).
d. Tighten clamp (2).
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
5-16
