TM 5-3810-306-20
Section V. FUEL PUMP MAINTENANCE
FUEL PUMP INSTALLATION
TOOLS:
General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
Clean rags (Item 1, Appendix C)
Gasket (Item 64, Appendix C)
Seal, banjo (Item 66, Appendix C)
Washers (Item 65, Appendix C) (2 Required)
EQUIPMENT CONDITION:
Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
DISCONNECT FUEL SUPPLY TUBES.
a. Remove fuel supply line (7) to fuel pump (6).
2.
DISCONNECT FUEL MANIFOLD LINE (3) AND
FUEL SUPPLY TUBE (8).
a. Remove connector screw (1), seal (2) and fuel
manifold line (3) end. Discard seal (2).
b. Remove connector screw (4), washers (5) and
fuel supply tube (8). Discard washers (5).
3.
TAG
AND
DISCONNECT
ELECTRICAL
CONNECTOR (9) TO FUEL SUPPLY PRESSURE
TRANSDUCER (10).
4.
DISCONNECT FUEL LINE (13).
5.
REMOVE FUEL PUMP (6).
a. Remove two capscrews (11) and fuel pump (6).
b. Remove and discard gasket (12).
5-18
