TM 5-3810-306-20
BATTERY BOX COVER AND SLAVE RECEPTACLE REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
Lifting device (2-ton capacity)
SUPPLIES:
Lockwashers (Item 28, Appendix C) (4 Required)
Lockwashers (Item 15, Appendix C) (5 Required)
Acid resistant paint (Item 36, Appendix C)
Lockwashers (Item 2, Appendix C) (2 Required)
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
REMOVE SLAVE RECEPTACLE (2).
a. Remove two capscrews (7) and washers (8)
securing battery cables to slave receptacle (2).
Tag wires.
b. Remove four nuts (3), lockwashers (4),
flatwashers (5) and screws (6) securing slave
receptacle to battery box cover (1). Remove
receptacle,
gasket
and
plate.
Discard
lockwashers (4).
8-98
