TM 5-3810-306-20
INSTALLATION:
1.
INSTALL BATTERY BOX COVER.
a.
If removed, install lights in battery box cover.
b.
Using suitable lifting device, position battery box
cover in place and secure with twelve screws
(17) and flatwashers (18).
c.
Remove tags and connect five electrical
connectors to two lights.
d.
Install three capscrews (11), new lockwashers
(12) and flatwashers (13) to secure battery box
cover to engine hood.
e.
Install two nuts (14), new lockwashers (15) and
flatwashers (16) securing battery box cover to
frame studs.
f.
Position access cover (10) and secure with four
screws (9).
g.
Install battery box cover door, if removed, using
two self-tapping screws (19) and lockwashers
(20).
2.
INSTALL SLAVE RECEPTACLE (2).
a.
Position slave receptacle (2) components on
battery box cover and secure with four screws
(6), flatwashers (5), new lockwashers (4) and
nuts (3).
b.
Remove tags and fasten battery cables to slave
receptacle using capscrews (7) and washers (8).
3.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.).
END OF TASK
8-100
