TM 5-3810-306-20
2.
REMOVE BATTERY BOX COVER (1).
a.
Remove four screws (9) securing access panel
(10) to battery box cover (1).
b.
Locate and remove three capscrews (11),
lockwashers (12) and flatwashers (13) securing
cover to engine hood. Discard lockwashers (12).
c.
Remove two nuts (14), lockwashers (15) and
flatwashers (16) securing cover to frame.
Discard lockwashers (15)
d.
Tag and disconnect five electrical leads to two
lights.
e.
Using a suitable lifting device support battery box
cover.
f.
Remove twelve screws (17) and flatwashers
(18). Remove battery box cover (1).
g.
Remove attaching hardware and lights from
battery box cover if necessary.
NOTE
If door is to be removed, unscrew two
self-tapping
screws
(19)
and
lockwashers (20) and slide door from
hinges. If a new door is to be installed
the inside must be coated prior to
installation
with
Bituminous
Acid
Resistant Coating, Military Specification
TTC 494A.
8-99
