BATTERY BOX REPLACEMENT

BATTERY BOX COVER AND SLAVE RECEPTACLE REPLACEMENT - cont - TM-5-3810-306-20_283

TM-5-3810-306-20 Container Crane 40-Ton Rough Terrain Model RTB75CC Manual
Page Navigation
237

TM 5-3810-306-20 BATTERY BOX REPLACEMENT TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033) SUPPLIES: Lockwashers (Item 15, Appendix C) (7 Required) Acid resistant coating (Item 36, Appendix C) EQUIPMENT CONDITIONS: Batteries removed from battery box. (Refer to page 8-96.) Battery box cover removed. (Refer to page 8-98.) REMOVAL: 1. REMOVE BATTERY BOX (1). a. Tag and remove all cables passing through grommets in battery box (1). b. Remove seven hex nuts (5), lockwashers (3), flatwashers (4) and three spacers (2) from mounting studs. Note position of spacers for reassembly. Discard lockwashers (3). c. Remove two plywood spacers (6). INSTALLATION: NOTE If battery box is to be replaced. New battery box must be coated with Bituminous Acid Resistant Coating, Military Specification TTC 494A. 1. INSTALL BATTERY BOX (1). a. Align battery box (1) holes with mounting studs and secure with three spacers (2), flatwashers (4), new lockwashers (3) and hex nuts (5). b. Install two plywood spacers (6). c. Reinstall battery cables through battery box (1) grommets. 8-101

Privacy Statement
Press Release
Contact