TM 5-3810-306-20
INSTALLATION:
1.
INSTALL FOOT THROTTLE CONTROL VALVE
(8).
a.
Align foot throttle control valve (8) with cab floor
mounting holes and secure with three capscrews
(9) and new lockwashers (10).
NOTE
Prior to installing fittings and hoses,
coat threads with Loctite #545.
b.
Install fittings on throttle control valve.
c.
Remove tags, plugs and connect two air lines to
foot throttle control valve.
2.
CONNECT THROTTLE CONTROL CABLE (1) TO
FOOT PEDAL.
a.
Position bracket (4) on pedal and secure with
two screws (5), new lockwashers (6) and nuts
(7).
b.
Position end of cable (1) in bracket (4) and install
barrel nut (3) exposing same amount of threads
as noted during removal. Install nut (2).
3.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
4.
START-UP ENGINE AND ALLOW AIR PRESSURE
TO BUILD UP. (REFER TO TM 5-3810-306-10.)
5.
CHECK
ALL
AIR
OPERATED
FUNCTIONS.
(REFER TO TM 5-3810-306-10.)
6.
INSTALL CAB BOTTOM PANEL. (REFER TO
PAGE 15-11.).
7.
INSTALL CAB FRONT PANEL. (REFER TO PAGE
15-10.).
END OF TASK
11-41
